Boston - Abri de piscine mi-haut!
Pool Cover x Boston : abri de piscine mi-haut
Découvrez BOSTON, l'abri de piscine mi-haut
Pool Cover présente BOSTON, son abri de piscine mi-haut
Abri de piscine mi-haut - BOSTON

MEDIUM HIGH SWIMMING POOL ENCLOSURE – BOSTON

DISCOVER THE POOL COVER MEDIUM HIGH SWIMMING POOL ENCLOSURE WITH ACCORDEON FRONT

Description

The high pool enclosure called BOSTON is also known as the mid-height pool enclosure. As indicated, it is midway between the residential high pool enclosure and the low enclosure. Its height is generally designed for any customer that wishes to avoid any administrative formalities associated with building permits. In France, the height is generally less than 1.80 m at its highest point.

Ideal for keeping your pool water completely clean, warmer (+8 to 12°C) and secure.

Reliability and robustness: The snow load resistance standard imposed by French Standards is 45 kg/m2. Our BOSTON pool enclosure is designed by our own in-house design office to exceed the standard. The BOSTON model, just like all other models of the range, with the exception of the PANAMA 120, is designed to provide a snow load resistance of up to 60kg/m2.

The BOSTON can be produced with sides with straight corners (also known as “3 angles”) or cut-off corners (also known as “5 angles”) optionally.

In its standard version, the BOSTON model consists of “x” sliding sections, 1 fixed section, 1 concertina front and 1 fixed rear.

This model can also be built onto a wall. In this case, we either remove the fixed back or the concertina front.

Consider asking our technician about the many possibilities of ensuring that your BOSTON pool enclosure is fully in keeping with your expectations. There is an almost infinite number of adaptations, as chosen by you.

Composition

THE BOSTON MODEL CONSISTS OF:

  • (x) sections including 1 fixed section
  • 1 concertina front with a French door integrated into the narrowest section
  • 1 fixed rear with a sliding door in the widest section
  • The doors are fitted with key locks
  • The concertina front with an overhang towards the outside of the enclosure
  • The height of the brushes between the concertina front and the floor is 50mm
  • The height of the brushes between the fixed rear and the floor is 50mm
  • The castors are made from polyamide and have a diameter of 100 mm. There are 8 per section.
  • The accessories are made from A2 stainless steel or aluminium
  • The anchors are A2 stainless steel cases with an M14 diameter and depth of 160mm
  • The anchors are attached by a 2-component chemical seal (epoxy)
  • The anchors are fitted with caps
  • The floor attachments consist of A2 stainless steel bolts with a butterfly head
  • The floor attachments of the first mobile section are fitted with keys
  • The side walls are fitted with SAN 4 mm transparent sheets
  • The roofs are fitted with PC translucent alveolar sheets (polycarbonate 6mm)
  • The seal between the sections consists of nylon brushes on a stainless steel backing.
  • The peak height of the highest section is 1.80 m (see drawings)
  • The theoretical length is always a multiple of 2.10 m. It is important to refer to the drawings to acknowledge the actual dimensions which are often greater than the theoretical dimensions.
  • Other dimensions and types of construction on demand.
Customisation

THE FOLLOWING IS POSSIBLE ON DEMAND (WITHOUT ADDITIONS):

  • Reversing the opening direction of the enclosure by inverting the front and the back
  • Moving the sliding door in the front and/or the back
  • Changing the height of the brushes of the concertina front and the fixed back
  • Raising of the fixed rear to allow it to move without scraping against the floor (large brushes)
  • Replacing the translucent roof sheets with OPALINE white sheets
  • Replacing the brushes between the sections with black EPDM seals
Important comments
  • There is a possible tolerance of 3% between the theoretical dimensions validated by the customer through the drawings and the actual dimensions of the delivered product. The seller and its customer must take this comment into account and consider the necessary tolerances at the installation site of the enclosure so that no difficulties are encountered.
  • The pool enclosure offered in this document is fitted with a light aluminium structure which is compliant with French Standard NF P90-309 and is able to resist a snow load equivalent to or less than 45 kg/m2. In the event of snow, it is important to clear the snow from the enclosure in order to avoid any risk of irreparable deformation.
  • Under no circumstances may the system of sliding modules on castors be assimilated with an airtight building, either at the level of the roof, the doors, the openings, the glazed surfaces, between the sliding sections and other joint systems.
  • The end customer will make sure that the support (floor) of the pool enclosure has a concrete stud which is at least 15cm thick at the level of its running rail.
  • In a bid to prevent the infiltration of rainwater via the ground, the end customer will make sure that there is a slope in the paving which begins at its highest point from inside to outside of the enclosure. In general, a slope of 1% is deemed to be sufficient.

EXAMPLE MEDIUM HIGH ENCLOSURE BOSTON

BOSTON 10.50M (5 SECTIONS) X 5.80M

Fixed rear with sliding door

Abri de piscine mi-haut Boston - Fiche technique 1

Concertina front

Abri de piscine mi-haut Boston - Fiche technique 2
Abri de piscine mi-haut Boston - Fiche technique 3
Boston: abri de piscine mi-haut de la marque Pool Cover

It constitutes a real microclimate fitted around your swimming pool and a great asset, adding to the value of your house.

Your opportunity to make your pool area an enjoyable and relaxing environment:

  • Stay out of the water and sit around the pool;
  • Read or just recline comfortably in your deckchair;
  • Play with the children in safety;
  • Chat with your family and friends…

With its resolutely modern and ergonomic shapes and excellent value for money, it’s both:

  • Low enough to fit discreetly into your garden while respecting the general aesthetics of your home;
  • High enough to allow you to stand up in the centre of your pool.

It does not normally require any planning permission!

When you marry the transparency and the aesthetics, you get a whole host of advantages.

Protection:

  • During bad weather;
  • The temperature increase in your pool;
  • Withstands strong wind, heavy rain and snow.

Safety:

  • Your children, grandchildren and family can play without fear;
  • Fitted with an anti-theft device to give you peace of mind.

Comfort and pleasure:

  • Impeccably clean water all the time;
  • Softer water from fewer maintenance products;
  • Sheltered from leaves and dirt.

Let the youngsters enjoy the garden. The POOL COVER swimming pool enclosure will bring you tranquillity and peace of mind.

We will help you to select the swimming pool enclosure that suits you best: Medium height telescopic swimming pool enclosures:

  • Can be made in all sizes (length, width);
  • Can be painted any colour;
  • Are made exclusively with right-angle panels (also called 3 angles) or cut-off corners (also called 5 angles);
  • Open in the direction you prefer (for example, towards a single fixed section);
  • Are fitted with or without rails;
  • Are generally suitable for the majority of swimming pools.

Let the youngsters enjoy the garden.

The POOL COVER swimming pool enclosure will bring you tranquillity and peace of mind.

With or without rails, the medium height telescopic swimming pool enclosure is easy to handle, with a sliding action on wheels and a guidance system fitted to the side of the structure (the drawer principle).

The enclosure can be opened manually or using a remote-controlled autonomous motor.

This device can be installed later.

Thanks to its ‘accordion’ or ‘swinging’ facade system (front and back), your pool is almost completely open as all of the sections fold into one.

You can have the sliding doors placed wherever you prefer. They can be fitted in the facades or on the sides.

In addition, there are other advantages such as: The temperature increase in your pool, impeccably and permanently clean water, softer water due to fewer maintenance products…

And above all there is safety!

The swimming pool enclosure will stop your children from accidentally falling into your pool.

Then you can leave them to play in your garden without worrying.

The POOL COVER swimming pool enclosure will bring you tranquillity and peace of mind.

Thanks to the medium high sliding enclosure, you are always on holiday!

All our enclosures and covers comply with the french standard NF P 90 309.

Important comment: Due to its extremely fine intrinsic qualities and the integrity of its guarantees, the price of a POOL COVER product will always be higher than other models offered by discount manufacturers, ‘cut-price’ retailers or Eastern European manufacturers.