Abri de piscine haut PANAMA
Pool Cover, fabricant d'abri de piscine haut
Modèle: PANAMA - Abri de piscine haut
L'abri de piscine haut de la marque Pool Cover: PANAMA
PANAMA - l'abri de piscine haut

HIGH SWIMMING POOL ENCLOSURE – PANAMA

DISCOVER THE HIGH SWIMMING POOL ENCLOSURE WITH ACCORDEON FRONT

Description

The high pool enclosure called PANAMA is also known as the residential high pool enclosure. A place offering genuine peace and quiet and satisfaction around your pool for you and your family. The PANAMA pool enclosure is an absolute must!

Ideal for keeping your pool water completely clean, warmer (+8 to 12°C) and secure.

Reliability and robustness: The snow load resistance standard imposed by French Standards is 45 kg/m2. Our classic PANAMA pool enclosure is designed by our own in-house design office to exceed the standard. The PANAMA model, just like all other models of the range, with the exception of the PANAMA 120, is designed to provide a snow load resistance of up to 60kg/m2.

In its standard version, the PANAMA model consists of “x” sliding sections, 1 fixed section, 1 concertina front and 1 fixed front.

The PANAMA can be produced with sides with straight corners (also known as “3 angles”) or cut-off corners (also known as “5 angles”) optionally.

This model can also be built onto a wall. In this case, we either remove the fixed back or the concertina front.

Consider asking our technician about the many possibilities of ensuring that your PANAMA pool enclosure is fully in keeping with your expectations. There is an almost infinite number of adaptations, as chosen by you.

Composition

THE PANAMA MODEL CONSISTS OF

  • (x) sections including 1 fixed section
  • 1 concertina front with a French door integrated into the narrowest section
  • 1 fixed rear with a sliding door in the widest section
  • The doors are fitted with key locks
  • The concertina front with an overhang towards the inside of the enclosure
  • The height of the brushes between the concertina front and the floor is 50 mm
  • The height of the brushes between the fixed rear and the floor is 50 mm
  • The castors are made from polyamide and have a diameter of 100 mm. There are 8 per section.
  • The accessories are made from A2 stainless steel or aluminium
  • The anchors are A2 stainless steel cases with an M14 diameter and depth of 160 mm
  • The anchors are attached by a 2-component chemical seal (epoxy)
  • The anchors are fitted with caps
  • The floor attachments consist of A2 stainless steel bolts with a butterfly head
  • The floor attachments of the first mobile section are fitted with keys
  • The side walls are fitted with SAN 4 mm transparent sheets
  • The roofs are fitted with PC translucent alveolar sheets (polycarbonate 6 mm)
  • The seal between the sections consists of nylon brushes on a stainless steel backing.
  • The height of the first section is 2 m and is measured at the cross beam and inside the enclosure (see drawings)
  • The theoretical length is always a multiple of 2.10 m. It is important to refer to the drawings to acknowledge the actual dimensions which are often greater than the theoretical dimensions.
  • Other dimensions and types of construction on demand.
Customisation

THE FOLLOWING IS POSSIBLE ON DEMAND (WITHOUT ADDITIONS):

  • Reversing the opening direction of the enclosure by inverting the front and the back
  • Moving the sliding door in the front and/or the back
  • Changing the height of the brushes of the concertina front and the fixed back
  • Raising of the fixed rear to allow it to move without scraping against the floor (large brushes)
  • Replacing the translucent roof sheets with OPALINE white sheets
  • Replacing the brushes between the sections with black EPDM seals
Important comments
  • There is a possible tolerance of 3% between the theoretical dimensions validated by the customer through the drawings and the actual dimensions of the delivered product. The seller and its customer must take this comment into account and consider the necessary tolerances at the installation site of the cover so that no difficulties are encountered.
  • The pool enclosure offered in this document is fitted with a light aluminium structure which is compliant with French Standard NF P90-309 and is able to resist a snow load equivalent to or less than 45 kg/m2. In the event of snow, it is important to clear the snow from the enclosure in order to avoid any risk of irreparable deformation.
  • Under no circumstances may the system of sliding modules on castors be assimilated with an airtight building, either at the level of the roof, the doors, the openings, the glazed surfaces, between the sliding sections and other joint systems.
  • The end customer will make sure that the support (floor) of the pool enclosure has a concrete stud which is at least 15 cm thick at the level of its running rail.
  • In a bid to prevent the infiltration of rainwater via the ground, the end customer will make sure that there is a slope in the paving which begins at its highest point from inside to outside of the enclosure. In general, a slope of 1% is deemed to be sufficient.

EXAMPLE HIGH ENCLOSURE

PANAMA 10.50M (5 SECTIONS) X 5.80M

Fixed rear with sliding door

Abri de piscine haut Panama: fiche technique 1

Concertina front with French door

Abri de piscine haut Panama: fiche technique 2
Abri de piscine haut Panama: fiche technique 3

Abri de piscine haut PANAMA de la marque Pool Cover